Vvdi Key Tool Plus Bmw Cas3++ Istap Key Programming

 

Vvdi Key Tool Plus Bmw Cas3++ Istap Key Programming

1. 20min in bench easy without problems: Xhorse VVDI Key Tool Plus add keyless go BMW e92 cas3++ista-p.

Open cas for full back-up and generate from eeprom.
Personal experience: I have full back-up for Cas2 cas3 cas3++istap cas4 etc with hextag. For me is no problem but I don’t try in obd for lose time.

2. 10 min done via OBD: Xhorse Key Tool Plus program key BMW 2010 Cas3++ (ISTAP) done. Make sure you have enough power supply.
Insert the ignition key into ignition switch and connect the BMW 2010 vehicle and VVDI Key Tool Plus well.
Tap “Immo Programming” -> Europe -> BMW -> Automatically diagnose models -> Start Programming -> it is detected as CAS3++ (ISTAP) -> Generate key via OBD -> Read key information -> “Yes” to add new key -> obtain the key info.

Click on “Yes” to start flash CAS firmware.
Take away the dealer key from ignition switch and click on “OK”.
It will take several minutes to flash CAS firmware.
Insert key into ignition and switch on, then click on “OK”.
Authenticating success.
Start security login…
Take way the dealer key from ignition switch as the on-screen instruction guide.
Reading data success and then click on “Save”.

Select “Prepare dealer key with programmer”.
Select “Key 3 FFFFFFFF Enable”.
Click “OK” to learn that CAS key data is encrypted, support make dealer key for it.
Please input a working key into programmer (key tool plus).
Please put new key into programmer.
Click “NO” because the current key is not smart key.
Make dealer key success, click on “OK”.

Click on “Add key”.
This function add the newly generated key to the IMMO system, need to be executed “Generate dealer key – Use programmer” function to generate key.
Please put new key into programmer.
Click “NO” because the current key is not smart key.
Start security login…
Take way the dealer key from ignition switch and click on “OK”.
Reading data success.
Adding key.
Start security login…
Writing data success…

New dealer key success written to CAS system.
You can start engine with the new key now.

Alright, no matter which method on bench or via OBD, Xhorse VVDI Key Tool Plus can do a great job

If you want to know more about Bmw key programmer, please click Bmw Trouble Repair.

2003 Saab 9-3 All Keys Lost Programming Tips

Question:
2003 Saab 9-3 all keys lost, Can xhorse vvdi key tool plus do this key?
I live in the US and they haven’t sold Saab here in a very long time.
Ii know Saab uses a tech2 as their scan tool? Can tech2 do the key?

Solution:
If USA cars are like EU cars both generations exist as 2003 model.
1) If it’s 1st gen it’s twice module under the seat. Need to read the Motorola processor and write key to t5.
2) If it is the second generation 9-3 it is CIM module out (behind the steering wheel) and need to read the eeprom. Read it in circuit, because it’s pretty bad stuck with protective coating. There is big chance to damage the board if you try to remove it.

You can read dump with vvdi prog and make file key with vvdi2.
GM tech2 can not do keys in all keys lost situation. Was working for Saab. The dealer solution is new module with keys. If you have used module with key programmed to it, it is pretty easy to adapt it to the car with tech2 tho.

Vvdi Key Tool Plus Bmw Cas3++ Istap Key Programming

Vvdi Key Tool Plus Bmw Cas3++ Istap Key Programming

1. 20min in bench easy without problems: Xhorse VVDI Key Tool Plus add keyless go BMW e92 cas3++ista-p.

Open cas for full back-up and generate from eeprom.
Personal experience: I have full back-up for Cas2 cas3 cas3++istap cas4 etc with hextag. For me is no problem but I don’t try in obd for lose time.

2. 10 min done via OBD: Xhorse Key Tool Plus program key BMW 2010 Cas3++ (ISTAP) done. Make sure you have enough power supply.
Insert the ignition key into ignition switch and connect the BMW 2010 vehicle and VVDI Key Tool Plus well.
Tap “Immo Programming” -> Europe -> BMW -> Automatically diagnose models -> Start Programming -> it is detected as CAS3++ (ISTAP) -> Generate key via OBD -> Read key information -> “Yes” to add new key -> obtain the key info.

Click on “Yes” to start flash CAS firmware.
Take away the dealer key from ignition switch and click on “OK”.
It will take several minutes to flash CAS firmware.
Insert key into ignition and switch on, then click on “OK”.
Authenticating success.
Start security login…
Take way the dealer key from ignition switch as the on-screen instruction guide.
Reading data success and then click on “Save”.

Select “Prepare dealer key with programmer”.
Select “Key 3 FFFFFFFF Enable”.
Click “OK” to learn that CAS key data is encrypted, support make dealer key for it.
Please input a working key into programmer (key tool plus).
Please put new key into programmer.
Click “NO” because the current key is not smart key.
Make dealer key success, click on “OK”.

Click on “Add key”.
This function add the newly generated key to the IMMO system, need to be executed “Generate dealer key – Use programmer” function to generate key.
Please put new key into programmer.
Click “NO” because the current key is not smart key.
Start security login…
Take way the dealer key from ignition switch and click on “OK”.
Reading data success.
Adding key.
Start security login…
Writing data success…

New dealer key success written to CAS system.
You can start engine with the new key now.

Alright, no matter which method on bench or via OBD, Xhorse VVDI Key Tool Plus can do a great job

If you want to know more about Bmw key programmer, please click Bmw Trouble Repair.