OBDSTAR X300 DP Plus Program 2018 Ford Kuga backup Proximity key successfully

OBDSTAR Key Tool Master / X300 DP PLUS test report: 2018 Ford Kuga backup Proximity key successfully.
Look at the image:

OBDSTAR Key Tool Master is as the same as X300 DP Plus (E-commerce exclusive).

Good to know:

Add new key: no need to connect to P002 adapter and Ford all keys lost cable.

If program key for Ford /Lincoln / Mustang AKL (the following list): need extra P002 adapter and OBDStar All Key Lost Cable for Ford /Lincoln / Mustang.

Image 2: All Key Lost Cable for Ford /Lincoln / Mustang

Image 3: P002 adapter

ESCAPE 2020 , ESCORT 2018-
EXPEDITION 2020 , EVEREST 2017-
EXPLORER 2017- , F-150 2017-
F-250 2017- , FOCUS 2018-
MUSTANG 2017- , TAURUS 2017-
MONDEO 2017- , FUSION 2017-
RANGER 2017- , AVIATOR 2020
CONTINENTAI 2016- , CORSAIR 2020
MKC2015- , MKT 2020
MKX2015- , MKZ2015-
NAUTILUS 2018- , NAVIGATOR 2018-

OBDSTAR X300 DP Plus Ford AKL programming guide:

1. Ford Lincoln Mustang all keys lost programming connecting methods

1). Diag cable OBD connector(male)
2). Connect P002 connector(female)
3). Connect vehicle OBD diag connector(male)
4). Red clip(battery terminal)
5). Orange clip(positive cable)
6). P002 adapter

2. Operation guide
IMMO⇒Americas⇒FORD LINCOLN MERCURY⇒V34.45⇒FORD⇒EUROPE⇒EDGE⇒PROXIMITY⇒
2016.4-

All Keys Lost.

Make sure the internet connection is normal, then have P002 adapter and AKL for Ford cable correctly connected to the vehicle.

Switch ignition off.

Have Key count and VIN.

Insert the key into the card slot, the position is as follows.

Is the alarm active?

Next steps are to follow the on-screen guide until key programming successfully.

Good to know:

There is a operation guide manual on how to use OBDSTAR X300 DP Plus to program Ford AKL

And there is also built-in tips in the obdstar X300 DP Plus (Look at the following image, click on “Tips” for instruction).

Program Kia Soluto 2020 2021 Remote Key by OBDSTAR X300 DP Plus

 

Here is the guide to program Kia Soluto 2020 2021 remote key with obdstar x300 dp plus. You can generate remote with either vvdi mini key tool or keydiy under Morning option, then program remote control with obdstar.

We generate remote with keydiy remote

You go to Kia, latest software version- Select from type- Remote system- 16-PIN -Type 3- Program Remotes
Turn on ignition switch

turn on ignition switch, then switch ignition off and remove key

Program remote, press LOCK or UNLOCK for more than 1 sec

program success
program next remote

Test both keys, car starts, remote control works.

If you want to know more about Key Programmer , please visit our website: https://www.obd2tool.com

OBDSTAR X300 DP Plus Program 2021 GMC YUKON Prox All Keys Lost via CAN FD Adapter

The least expensive way to program new proximity on this 2021 GMC YUKON when all keys lost should be OBDSTAR X300 DP PLUS (key master dp plus) and CAN FD GM adapter. You just need OEM GM key, no dealer code needed. It is gonna be so much cheaper way.

The GM adapter is compatible with the following new GM models:

Brand	Model	Year
Cadillac	Escalade	2021
	CT4
	CT5	2020
Chevrolet	TRAX/TRACKER(4A)
	CAVALIER/ONIX(4A)
	Tahoe	2021
	Silverado
	Suburban
GMC	Yukon
	Sierra
	Denali
Buick	Envision
	GL8(LSY)

 

Let’s get started.
Get right into IMMO to start programming this new OEM key proximity for this vehicle.
Before you start, connect x300dp plus to WiFI, constantly available Hotspot or Local signal. Online calculation requires network connection.
Go to update make sure you have both gm data as well as the gm IMMO software V33.24 or above.

Connect CAN FD adapter to the OBDB port using OBD cable and OBDII cable
Select IMMO, then under American’s GM and GM V33.30

Next, select Program keys – GMC – USA Canada – Yukon – Proximity – 2021 – Without Pin Code – All Keys Lost

Choose Enter to erase all the keys on the system
Ensure CAN FD GM adapter is in place to continue
Press the Push to Start button continually or open and close door every 10 seconds during communication

The system is searching the key
This keeps anti-theft from locking the system and canceling the process.

Once accessories and Dash light up, you have entered the anti-theft system.
10 minutes wait mandatory

after 10 minutes theft deterrent system will be deactivated.confirm old key deletion and continue to add new keys now we start to add new key to the system.program new key 1 of 2 into Vehicle signal coil located in the Control driver cup holder

On screen read “Ready for Key 1”, press Push to start button for 2 seconds to add key

When screen reads “Ready for Key 2”, replace key 1 and press Push to start button for 2 seconds to add key

When screen reads “Ready for Key 3”,all keys are programmed, you can exit the system.

confirm desired key number and exit

once the system configures, press and hold Start-Stop button 16 seconds to close key learning

Key learning complete
Turn off ignition switch, open and close door just once.

when the loading car is completed, the system is fully closed.
Then test all key buttons, functions and prox start.
All working. This is a super easy and cheap way to get it done.