Lonsdor K518 Program Chevrolet Cruze Remote Key All Keys Lost by OBD

Guide to read pin code and program remote key on a Chevrolet Cruze when all keys have lost by using Lonsdor K518ISE key programmer.
Step 1: Read Pin Code
Connect Auto Key Programmer K518 Host with vehicle via OBD diagnostic socket


Select Immobilizer->Chevrolet -> Read Pin Code->Read Pin Code Type 1

Turn on ignition switch

Communicating…
Lonsdor K518ISE from Obd2tool.com read pin code success.

Step 2: Program Remote Key
Go back to Chevrolet menu
Select Cruze-> Immobilizer-> All Keys Lost

Close all doors and turn on ignition

Lonsdor K518 will require enter 4-digit pin code to access and confirm

Configuring system, wait for 10 minutes.

Turn ignition off. Remove key

Switch on and off the driver door, make sure all the electrical appliances are off.
Click OK to continue.

Insert key to be programmed and turn on ignition switch

Program success. Press YES to program next key.

Follow steps above to program next key or more keys.
Turn ignition off. Remove key.
Program complete.

Start car and test the remote.

http://forobd2tool.com/blog/2017/11/13/lonsdor-k518-read-hyundai-i10-47-pin-code-and-program-smart-key-by-obd/