How to read MSV80 by CGDI Prog BMW Key Programmer

CGDI Prog BMW Key Programmer  is high technical products which mainly performing auto diagnosis, key programming and security maintenance. CGDI Prog BMW MSV80 Key Programmer support CAS1, CAS2,CAS3,CAS3+, CAS4 /CAS 4+/FEM/BDC key programming and all key lost.

CGDI-Prog BMW MSV80 Main Function:
Auto diagnose
Programming
Security maintenance
Language: English/Chinese
Latest software version: V1.0.02
Update Online: http://www.cgprogcar.com/ (same manufacturer as CG100 airbag reset device)
Warranty: 1 year
CGDI Prog on OBD2TOOL support model list :
1.BMW CAS1/CAS2/CAS3/CAS3+/FEM/BDC key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.
2.BMW CAS4/CAS4+/Support key matching,support key all lost matching.
3.Support BMW key inspection,can check key what status in.
4.Support BMW engine computer DME replacement.
5. Support BMW MSV80/MSD80/MSD85 series OBD read ISN code (no need to spilt computer when matching key)
6. Support BMW key unlock.
CGDI Prog Key Programmer support BMW Model list:

How to use CGDI Prog key programmer to read BMW MSV80?
Method 1: can read directly ISN code in the car,please make sure car voltage is 12V above,directly connect OBD to operate–time about 5 minus.
Methods 2: can directly split engine computer (DME) to operate–connect diagram as follows:


MSV80/D80/D85/wiring in the experimental bench.
Note: FEM/BDC function is added to CGDI Prog BMW MSV80 key programming machine (Aug. 2017) ! If you device only supports BMW CAS1,CAS2,CAS3 CAS4 /CAS 4+ , you can pay for 175USD for FEM,BDC authorization.