Step 1: Use Main Cable to connect SKP900 Key Programmer and a Nissan OBD connector, start the car with a remote and wait a few seconds for SKP900 to start.
Step 2: Choose Nissan>>>New Structure>>>Yes to continue.
Step 3: Select Key 1 and choose Yes
Step 4: Select Immobilizer System according to the cars Immo and choose Yes.
Step 5: Wait for a few minutes until OBD2 key programmer SKP900 communicates with the car.
Step 6: Select Function then Key Adapt and choose Yes.
Step 7: The SKP-900 will tell you how to do, you should insert a new key and turn ignition on. You may see the IMMO indicator light will flash when inserting a key which cannot start engine. Select Yes.
Step 8: Close ignition switch and select Yes.
Step 9: Wait for system adapting and then open ignition switch and select Yes.
Step 10: Wait for a few minutes and the key is programmed successfully.
This is from obd2tool.com: Best car key tools for sale website Auto Key Programmer technical support: How to Use SKP900 to Program ID46 Nissan Key
No comments:
Post a Comment